BP6-005 thru bp6-10 page: 1 frontier electronics corp. 667 e. cochran street, simi valley, ca 93065 tel: (805) 522-9998 fax: (805) 522-9989 e-mail: frontiersales@frontierusa.com web: http://www.frontierusa.com 6a single phase silicon bridge rectifier BP6-005 thru bp6-10 features z plastic material used carriers underwriters laboratory flammability recognition 94v-0 z typical ir less than 1 a z high surge current capability z low forward voltage drop z ideal for printed circuit board mechanical data z case: void-free plastic package dimensions in inches and (millimeters) z terminals: leads, solderable per mil-std-202, method 208 z mounting position: any z weight: 5.5 grams maximum ratings and electrical characteristics ratings at 25 c ambient temperature unless otherwise specified single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20% ratings symbol BP6-005 bp6-01 bp6- 02 bp6-04 bp6-06 bp6-08 bp6-10 units maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified output current at @ ta=40oc(note 1) @ ta=40oc (note 2) i o 6.0 3.0 a peak forward surge current single sine-wave superimposed on rated load i fsm 150 a storage temperature range t stg - 55 to + 150 oc operating temperature range t op - 55 to + 125 oc electrical characteristics (a t t a =25 c unless otherwise noted) characteristics symbol BP6-005 bp6-01 bp6-02 bp6-04 bp6-06 bp6-08 bp6-10 units maximum instantaneous forward voltage drop at 3.0a v f 1.1 v maximum reverse current at rat-ed dc blocking voltage per element ta=25oc i r 10 a note: 1. unit mounted on 4" x 4" x 0.06" thick (100mm 2 x 1.5mm) copper plate 2. unit mounted on p.c. board at .375" (9.5mm) lead lengths without heat sink .750 (19) min 0.270(6.86) 0.230(5.84) hole for #6 screw 0.158(4.0) 0.142(3.6) 0.094(2.4) x 45o chamfer 0.620(15.75) 0.580(14.73) 0.445(11.3) 0.405(10.3) 0.107(2.72) 0.067(1.70)
BP6-005 thru bp6-10 page: 2 ratings and characteristic curves BP6-005 thru bp6-10 fig. 5 - typical reverse characteristics 10 1.0 0.1 .01 instantaneous reverse current, microamperes 0 20 40 60 80 100 120 140 percent or rated peak reverse voltage t j =25oc fig. 2 - typical junction capacitance per element 100 50 10 5 capacitance, pf 1 5 10 50 100 reverse voltage , volts t j =25oc f=1mh z vsig=50m vp-p t j =150oc fig. 4 - maximum non-repetitive peak forward surge current 150 125 100 75 50 25 peak forward surge current, amperes 1 2 4 6 10 20 40 60 100 number of cycles at 60h z single sine-wave (jedec method) 100 10 1.0 0. 1 .01 fig. 3 - typical instantaneous forward characteristics instantaneous forward current, amperes 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 instantaneous forward voltage, volts t j =25oc 300us = pulse width 10% duty cycle fig. 1 -bp6 series derating curve output rectified current 10 8.0 6.0 4.0 2.0 0 average forward output current, amperes 0 50 100 150 ambient temperature, oc 60h z resistive or inductive load case?mounted on 4x4x.06? thick (100x100x1.5mm) copper plate pc board mounted. ta 9.5mm lead lengths
|
